Punching and Die Cutting Machine working principle is the use of die-cutting knives, knives, metal molds, steel wire (or steel plate carved into the template), Punching
and Die Cutting Machine through the pressure plates to exert a certain pressure, printing or cardboard rolled into a certain shape. If the entire printing press cut into a
single graphic product called die-cutting, if the use of steel wire on the printed product or leave a bend of the groove mark is called indentation; by heating the mold to
a certain temperature, printing on the surface of the printed product has a stereo effect of the pattern or font called bronzing; if a substrate is reused on another substr
ate, it is referred to as a fitting;2 Field of work
1), Adhesive Products: A variety of electronics: Electrical Special Rubber pads, silicone stickers, magic stickers, conductive adhesive, strong double-sided Adhesive,
backlight screen, such as electronic industry, IT industry membrane switch, automotive industry used adhesive products.2), dustproof material: cosmetic cotton, camera cotton, high-density sponge, filter cotton, dust-proof net, Non-woven fabric.
1), before the use or interval of a working period of time, Punching and Die Cutting Machine the machine operating parts of lubricating oil (please add $number special
butter);2), the use of the process do not use the hand or other parts of the body into the die-cutting area, please use infrared protection device;
4), machine stamping products maximum stamping load does not allow more than the nominal pressure of the machine, long-term load work, reduce machine life,
Punching and Die Cutting Machine damage to the fuselage;5), work or debugging should follow the gradual, do not card board, such as card board, please immediately stop, troubleshooting after use.